| |
|
|
| |
Citizen
IDP-3535 |
|
| |
Printer
Driver: |
Citizen,
v3.61 (Tested with Windows 98 and NT 4.0,
Windows XP) select iDP3530 during driver installation
|
| |
SunEase
2k Preferences - Receipts tab page: |
Select
correct printer from list (iDP3530)
Select Load Defaults button (SunEase v1.25)
or Top = .05, Left = .25, Right = 3.95, Bottom = 8.0 and check
Print 40 Column Receipts
|
| |
SunEase
2k Preferences - Fonts/CD tab page: |
Use 16
cpi font and size of 12 for fonts 1 - 4
Use Control for font #5
Enter CHR(65) for the Drawer Code |
| |
|
|
| |
Citizen
IDP-3535 |
|
| |
Printer
Driver: |
Citizen,
v3.10c (Tested with Windows 95, 98 & ME) |
| |
SunEase
2k Preferences - Receipts tab page: |
Select
correct printer from list
Select Load Defaults button |
| |
SunEase
2k Preferences - Fonts/CD tab page: |
Use bold
and italic settings to print in red ink
Enter ~1 or ~2 for the Drawer Code |
| |
|
|
| |
Citizen
IDP-3535 Serial |
|
| |
Printer
Driver: |
Citizen,
v3.10c (Works with Windows 95 or 98 or ME) |
| |
Printer
Properties: |
Configure
COM Port to 2400 BPS, 7 Data, Even Parity, 1 Stop and Hardware
flow control |
| |
Printer
Setup: |
Set DS-2
DIP switches as follows: 1=On, 2=Off, 3=On, 4=On, 5=Off, 6=Off,
7=Off, 8=Off |
| |
SunEase
2k Preferences - Receipts tab page: |
Select
correct printer from list
Select Load Defaults button |
| |
SunEase
2k Preferences - Fonts/CD tab page: |
Double
wide fonts do not print correctly
Use bold and italic settings to print in red ink
Enter ~1 or ~2 for the Drawer Code |
| |
|
|
| |
Epson
TM-T88 Serial |
|
| |
Printer
Driver: |
Epson TM
|
| |
SunEase
2k Preferences - Receipts tab page: |
Select
correct printer from list
Setup margins as needed |
| |
SunEase
2k Preferences - Fonts/CD tab page: |
Setup the
fonts to use 10cpi
Specific printer fonts include 20cpi, 15cpi, 10cpi & 7.5cpi.
All printable fonts are listed
Select a specific printer font for the 5th font
Enter CHR(129) for Drawer Code (range is 129 to 133) |
| |
|
|
| |
Epson
TM-U200 |
|
| |
Printer
Driver: |
Epson TM
(Tested with Windows 95, 98 and ME) |
| |
SunEase
2k Preferences - Receipts tab page: |
Select
Epson TM-300A No Cut printer from list
Select Load Defaults button (v1.28+)
or Top = .0, Left = .25, Right = 0, Bottom = 0 and check Print
40 Column Receipts |
| |
SunEase
2k Preferences - Fonts/CD tab page: |
Specific
printer fonts include 16cpi, 13.3cpi, 8cpi & 6.7cpi. All
printable fonts are listed
Select 16 cpi for the 5th font
Enter CHR(130) for Drawer Code (range is 129 to 133) |
| |
|
|
| |
MMF
Serial Cash Drawer |
|
| |
Printer
Driver: |
Generic/Text
Only |
| |
SunEase
2k Preferences - Receipts tab page: |
Select
Generic/Text Only printer from list |
| |
SunEase
2k Preferences - Fonts/CD tab page: |
Enter CHR(65)
for Drawer Code
This is the default code ("A") for this drawer. |
| |
|
|
| |
NCR
A793 (Serial) |
|
| |
Printer
Driver: |
NCR A793
by Axiohm
Install Axiohm A793 for no cash drawer
or Axiohm A793 CD#1 for cash drawer support |
| |
Printer
Properties: |
Configure
COM Port to 9600 BPS, 8 Data, No Parity, 1 Stop and Xon/Xoff
flow control (default settings) |
| |
Printer
Setup: |
Set DS-2
DIP switches as follows: 1=Off, 2=Off, 3=Off, 4=Off, 5=On, 6=Off
(default settings) |
| |
SunEase
2k Preferences - Receipts tab page: |
Select
correct printer from list
Select Load Defaults button |
| |
SunEase
2k Preferences - Fonts/CD tab page: |
Default
fonts will be loaded, specific printer font names begin P437
or P850, all printable fonts will be displayed in font list
Select Uses Windows Driver for Cash drawer |
| |
|
|
| |
Star
SP200 |
|
| |
Printer
Driver: |
Star (Works
with Windows 95, 98, and ME)
For Windows XP use Citizen IDP-3530 driver v3.61 |
| |
Printer
Properties: |
Setup for
cash drawer is set under properties |
| |
SunEase
2k Preferences - Receipts tab page: |
Select
correct printer from list
Select Load Defaults button |
| |
SunEase
2k Preferences - Fonts/CD Tab: |
Default
fonts will be loaded
Select Uses Windows Driver for Cash drawer |
| |
|
|
